HP HP0-Y32 questions and answers

IT-Tests.com's HP HP0-Y32 exam training materials are the necessities of each of candidates who participating in the IT certification. With this training material, you can do a full exam preparation. So that you will have the confidence to win the exam. IT-Tests.com's HP HP0-Y32 exam training materials are highly targeted. Not every training materials on the Internet have such high quality. Only IT-Tests.com could be so perfect.

IT-Tests.com not only have a high reliability, but also provide a good service. If you choose IT-Tests, but don't pass the exam, we will 100% refund full of your cost to you. IT-Tests.com also provide you with a free update service for one year.

Exam Code: HP0-Y32
Exam Name: HP (Design and Troubleshooting Open Standard Networks)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 75 Questions and Answers
Last Update: 2013-11-09

If you are still troubled for the HP HP0-Y32 certification exam, then select the IT-Tests.com's training materials please. IT-Tests.com's HP HP0-Y32 exam training materials is the best training materials, this is not doubt. Select it will be your best choice. It can guarantee you 100% pass the exam. Come on, you will be the next best IT experts.

Practice what you preach is the beginning of success. Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results. IT-Tests.com's HP HP0-Y32 exam training materials are the best training materials for this exam. With it you will have a key to success. IT-Tests.com's HP HP0-Y32 exam training materials are absolutely reliable materials. You should believe that you can pass the exam easily , too.

HP0-Y32 (Design and Troubleshooting Open Standard Networks) Free Demo Download: http://www.it-tests.com/HP0-Y32.html

NO.1 Click the Exhibit button.
You install two E5400 zl Series switches and connect them with a two-port static trunk. All hosts on both
switches are in VLAN 20. However, some hosts on Core 1 cannot ping some hosts on Core 2 and vice
versa. All hosts can ping all hosts on their own switch. Event logs on the two switches do not show
significant errors. What should you do to determine the cause of this connectivity issue? (Select three.)
A. Use traceroute to determine which device is dropping the ping packets.
B. Verify the trunk configuration on each core switch.
C. Change the IP address for the default VLAN on Core 2 so that it is in the same subnet as the default
VLAN on Core 1.
D. Verify physical connectivity between the switches.
E. Use LLDP to check the identities of the devices and their neighbors.
Answer: BDE

HP   HP0-Y32   HP0-Y32   HP0-Y32   HP0-Y32   HP0-Y32 test answers

NO.2 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which action can you take that will help you
discover this new link?
A. Investigate switch syslog information for gateway changes.
B. Compare route tables of both routers.
C. Review LLDP information on subnet 20 root bridge.
D. Follow path cost to root from subnet 20.
E. Initiate a traceroute from both subnets.
Answer: D

HP practice test   HP0-Y32 test answers   HP0-Y32 test

NO.3 Click the Exhibit button.
You need to limit the amount of broadcast traffic in this customer's network. In order to do so, you add a
second VLAN, VLAN2 (10.0.1.0/24). Now, clients on VLAN2 cannot reach the Internet and cannot ping
clients on VLAN1. They can successfully ping the default gateway (10.0.1.1). What should you do first to
determine the cause of the problem?
A. Disable broadcast limiting on the core switch.
B. Check the ISP's firewall settings and modify accordingly.
C. Request the configuration of the network devices.
D. Request a network trace from the ISP.
E. Get the MAC address table of the network devices.
Answer: C

HP   HP0-Y32 original questions   HP0-Y32 certification training

NO.4 You install new category 6a home run network cables for all users. You test a random sampling of the
cables, and they all pass. Users are complaining about dropped packets, slowness, and other intermittent
results. What is the best tool to use for initial troubleshooting?
A. Simple Network Management Protocol (SNMP)
B. Time Domain Reflectometer (TDR)
C. Packet Analyzer
D. HP Intelligent Communications Manager (ICM)
Answer: B

HP answers real questions   HP0-Y32 dumps   HP0-Y32 pdf   HP0-Y32   HP0-Y32

NO.5 Which step will provide helpful information about the issue?
A. Analyze the port statistics for the client you are pinging from.
B. Compare the arp table entries on the client when it works and when it does not.
C. Analyze the port statistics for the switch to which the client is connected.
D. Analyze the port statistics for all clients in VLAN 2 when the problem occurs.
Answer: B

HP   HP0-Y32   HP0-Y32 exam prep   HP0-Y32   HP0-Y32 exam simulations

NO.6 You are working with a customer who has reported connectivity issues on a specific VLAN. All of their
clients were previously in VLAN1 until VLAN10 was added in order to limit the amount of broadcast traffic.
Now, the clients on VLAN10 cannot reach the Internet. These clients cannot ping clients on VLAN1, but
can successfully ping the default gateway. Which information will help you troubleshoot this problem?
(Select two.)
A. network topology map
B. uptime of the network devices
C. network IP addressing scheme
D. names of all VLANS
E. a list of the NTP servers on the network
Answer: AC

HP   HP0-Y32 practice test   HP0-Y32

NO.7 Click the Exhibit button.
Which issue does the Optical Time Domain Reflectometer (OTDR) show?
A. out of phase
B. extensive attenuation
C. loss of [optical] signal
D. bend or kink in the optical cable
E. low frequency roll-off C:\Pasban Work\Cert Paper
Exams\HP\HP0-Y32\HP0-Y32-A-Extracted\HP0-Y32-A-Extracted\HP0-Y32-A\23.JPG
Answer: D

HP questions   HP0-Y32   HP0-Y32   HP0-Y32 exam

NO.8 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. Which link transitions are blocked on subnet
20?
A. link from 20b to 20c
B. link from 20a to 20c
C. link from 20a to 20b
D. link from 20c to 30b
Answer: C

HP   HP0-Y32   HP0-Y32   HP0-Y32

NO.9 Click the Exhibit button.
A user adds an untagged link between switch 20c and 30b. What is the impact of the user's actions?
A. Internet connectivity to subnet 20 users is broken.
B. STP Root Bridge of Subnet 20 moves.
C. All Subnet 20 traffic is routed through Subnet 30.
D. STP alternate path selection remains unchanged.
Answer: B

HP demo   HP0-Y32   HP0-Y32 exam prep   HP0-Y32

NO.10 Based on these basic facts, what can you "rule out" as possible causes of this problem? (Select three.)
A. the external gateway having no route to VLAN 2
B. misconfigured clients in VLAN1
C. a transient layer 1 issue
D. the firewall enabled on the client causing connectivity issues
E. a loop in VLAN1
Answer: ACD

HP   HP0-Y32 braindump   HP0-Y32   HP0-Y32   HP0-Y32 pdf   HP0-Y32

IT-Tests.com offer the latest 650-304 Questions & Answers and high-quality 70-489 PDF Practice Test. Our C_TSCM62_65 VCE testing engine and HP0-J60 study guide can help you pass the real exam. High-quality 74-344 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/HP0-Y32.html