IBM certification 000-611 exam training programs

Since IBM 000-611 certification is so popular and our IT-Tests.com can not only do our best to help you pass the exam, but also will provide you with one year free update service, so to choose IT-Tests.com to help you achieve your dream. For tomorrow's success, is right to choose IT-Tests. Selecting IT-Tests, you will be an IT talent.

We should use the most relaxed attitude to face all difficulties. Although IBM 000-611 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because IT-Tests.com's IBM 000-611 exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. IT-Tests.com's IBM 000-611 exam training materials is the best medicine for candidates.

Whole IT-Tests's pertinence exercises about IBM certification 000-611 exam is very popular. IT-Tests's training materials can not only let you obtain IT expertise knowledge and a lot of related experience, but also make you be well prepared for the exam. Although IBM certification 000-611 exam is difficult, through doing IT-Tests's exercises you will be very confident for the exam. Be assured to choose IT-Tests.com efficient exercises right now, and you will do a full preparation for IBM certification 000-611 exam.

IT-Tests.com is a website to provide IT certification exam training tool for people who attend IT certification exam examinee. IT-Tests's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions. IN a short time of using IT-Tests's simulation test, you can 100% pass the exam. So spending a small amount of time and money in exchange for such a good result is worthful. Please add IT-Tests's training tool in your shopping cart now.

Exam Code: 000-611
Exam Name: IBM (DB2 10.1 DBA for Linux, UNIX, and Windows)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 118 Questions and Answers
Last Update: 2013-12-20

000-611 (DB2 10.1 DBA for Linux, UNIX, and Windows) Free Demo Download: http://www.it-tests.com/000-611.html

NO.1 Due to a hardware failure, it appears that there may be some corruption in database DB_1 as DB2 is
reporting a "bad page". DB2DART is performed for the entire database and it appears that several bad
pages were detected in table space TBSP_1.
What command can be used to recover the database and repair the corruption in table space TBSP_1?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE TABLESPACE
D. ROLLFORWARD DATABASE
Answer: B

IBM   000-611 exam prep   000-611

NO.2 Which statement is correct when describing trusted contexts?
A. A trusted context defines a trust relationship for a connection between the database and an external
entity.
B. A trusted context promotes the authorization level of the connection initiator and grants them DBADM
authority.
C. A trusted context defines a trust relationship between a user and a table allowing that user additional
capabilities.
D. A trusted context gives the database connection the ability to bypass auditing since authentication has
already occurred.
Answer: A

IBM   000-611   000-611   000-611 original questions   000-611 questions

NO.3 A table named SALES was created as follows:
If management wants to use Label-Based Access Control (LBAC) to protect individual rows in the SALES
table, and the security policy needed (SEC_POLICY) has already been created, what must be done to
protect the table as desired?
A. Associate the SEC_POLICY security policy with the SALES table.
B. Add a column with the DB2SECURITYLABEL data type to the SALES table.
C. Add a column with the DB2SECURITYLABEL data type to the SALES table and then associate the
SEC_POLICY security policy with the table.
D. Add a SECURED WITH clause to every column in the SALES table and then associate the
SEC_POLICY security policy with the SALES table.
Answer: C

IBM practice test   000-611   000-611   000-611   000-611 certification training

NO.4 What are two types of security label components that can be used with Label-Based Access Control
(LBAC)? (Choose two).
A. Set
B. Tree
C. Group
D. Range
E. Hierarchy
Answer: A,B

IBM   000-611 demo   000-611   000-611   000-611

NO.5 What is the correct procedure for recovering a dropped table when DROPPED TABLE RECOVERY has
been enabled and the database must remain online?
A. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
database and recover the droppedtable.
B. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
appropriate table space and recover thedropped table.
C. Restore the database from a backup image that was taken before the table was dropped; run the
ROLLFORWARD DATABASE command withthe RECOVER DROPPED TABLE option to restore the
database and recover the dropped table.
D. Restore the appropriate table space from a backup image that was taken before the table was dropped;
run the ROLLFORWARD DATABASEcommand with the RECOVER DROPPED TABLE option to restore
the appropriate table space and recover the dropped table.
Answer: D

IBM   000-611 practice test   000-611 pdf   000-611   000-611 study guide   000-611 exam simulations

NO.6 Where are column mask definitions stored?
A. In the table definition
B. In the system catalog
C. In the table space metadata
D. In the database configuration file
Answer: B

IBM   000-611   000-611

NO.7 What is the MAX_LOG database configuration parameter used for?
A. To limit how many log files a single transaction can span.
B. To limit the percentage of primary log space a running transaction can consume.
C. To limit the total number of primary and secondary log files a database can consume.
D. To limit the total number of secondary log files a transaction can consume before infinite logging is
enabled.
Answer: B

IBM   000-611   000-611 dumps   000-611   000-611 demo

NO.8 Which command can be used to restore a corrupted database using only the recovery history file?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE DATABASE
D. ROLLFORWARD DATABASE
Answer: B

IBM exam dumps   000-611   000-611 practice test   000-611

NO.9 Which command will define the alternate diagnostic data directory path as /db2data/db2dump2?
A. db2set ALT_DIAGPATH=/db2data/db2dump2
B. db2set SECONDARY_DIAGPATH=/db2data/db2dump2
C. UPDATE DBM CFG USING ALT_DIAGPATH /db2data/db2dump2
D. UPDATE DBM CFG USING SECONDARY_DIAGPATH /db2data/db2dump2
Answer: C

IBM   000-611 demo   000-611 test questions   000-611   000-611 test

NO.10 If the current value for self-tuning memory is: Self Tuning Memory (SELF_TUNING_MEM) = ON
(Inactive) Which statement is true?
A. Self-tuning is occurring only on the instance memory area.
B. The memory tuner is actively tuning the memory on the system.
C. Self-tuning is not occurring because it is waiting for the database to be recycled.
D. Self-tuning is not occurring because there are less than two memory consumers enabled.
Answer: D

IBM exam   000-611 exam prep   000-611

NO.11 In IBM Data Studio, where can you schedule script-based jobs?
A. Job Console
B. Job Manager
C. Task Manager
D. Utilities Console
Answer: B

IBM   000-611   000-611 braindump   000-611   000-611 certification training

NO.12 You have an High Availability and Disaster Recovery (HADR) environment set up and you want to read
from the standby database. What must you do?
A. Assign the value ON to the DB2_HADR_ROS registry variable.
B. Assign the value ON to the DB2_HADR_SNAP registry variable.
C. Execute the STOP HADR command to temporarily break the HADR connection to the standby.
D. Execute the TAKEOVER HADR command to instruct the standby database to takeover as the new
primary database.
Answer: A

IBM exam   000-611   000-611   000-611   000-611   000-611 demo

NO.13 If a single node database is actively being used by applications when a power failure occurs, what
method is used to bring the database back to a consistent state once power has been restored.?
A. Crash recovery
B. Version recovery
C. Disaster recovery
D. Roll-forward recovery
Answer: A

IBM pdf   000-611 exam simulations   000-611   000-611 pdf

NO.14 The values of the automatic maintenance database configuration parameters for a database named
SAMPLE are as follows:
What commands must be run to enable real-time statistics collection on the SAMPLE database?
A. UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample
USING AUTO_STMT_STATS ON;
B. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STMT_STATS ON;
C. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STATS_VIEWS ON; D.
UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING
AUTO_STATS_VIEWS ON;
Answer: B

IBM practice test   000-611 demo   000-611 exam   000-611 exam dumps

NO.15 What unit of measurement is used to represent the cumulative total cost of a node in a Visual Explain
access plan diagram?
A. CPU cycles
B. Elapsed time, in milliseconds
C. Processing instructions performed
D. Timerons
Answer: D

IBM exam prep   000-611   000-611 braindump   000-611

IT-Tests.com offer the latest HIO-201 Questions & Answers and high-quality HP2-H29 PDF Practice Test. Our 156-215.13 VCE testing engine and JN0-533 study guide can help you pass the real exam. High-quality 70-321 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/000-611.html