Cisco certification 642-885 the latest exam questions and answers

IT-Tests.com not only provide the products which have high quality to each candidate, but also provides a comprehensive after-sales service. If you are using our products, we will let you enjoy one year of free updates. So that you can get the latest exam information in time. We will be use the greatest efficiency to service each candidate.

IT-Tests's experienced expert team has developed effective training program a for Cisco certification 642-885 exam, which is very fit for candidates. IT-Tests.com provide you the high quality product, which can let you do simulation test before the real Cisco certification 642-885 exam. So you can take a best preparation for the exam.

IT-Tests.com can provide professional and high quality products. It is the industry leader in providing IT certification information. To selecte IT-Tests.com is to choose success. IT-Tests.com's Cisco 642-885 exam training materials is your magic weapon to success. With it, you will pass the exam and achieve excellent results, towards your ideal place.

IT-Tests.com's Cisco 642-885 exam training materials are the best training materials of all the Internet training resources. Our visibility is very high, which are results that obtained through many candidates who have used the IT-Tests.com's Cisco 642-885 exam training materials. If you also use IT-Tests.com's Cisco 642-885 exam training materials, we can give you 100% guarantee of success. If you do not pass the exam, we will refund the full purchase cost to you . For the vital interests of the majority of candidates, IT-Tests.com is absolutely trustworthy.

Exam Code: 642-885

Exam Name: Cisco (Deploying Cisco Service Provider Advanced Routing (SPADVOUTE))

Only to find ways to success, do not make excuses for failure. To pass the Cisco 642-885 exam, in fact, is not so difficult, the key is what method you use. IT-Tests.com's Cisco 642-885 exam training materials is a good choice. It will help us to pass the exam successfully. This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have.

642-885 (Deploying Cisco Service Provider Advanced Routing (SPADVOUTE)) Free Demo Download: http://www.it-tests.com/642-885.html

NO.1 In Cisco IOS-XR, the maximum-prefix command, to control the number of prefixes that can be installed
from a BGP neighbor, is configured under which configuration mode?
A. RP/0/RSP0/CPU0:P2(config-bgp)#
B. RP/0/RSP0/CPU0:P2(config-bgp-af)#
C. RP/0/RSP0/CPU0:P2(config-bgp-nbr)#
D. RP/0/RSP0/CPU0:P2(config-bgp-nbr-af)#
Answer: D

Cisco   642-885   642-885 braindump   642-885 pdf

NO.2 When a BGP route reflector receives an IBGP update from a non-client IBGP peer, the route reflector
will then forward the IBGP updates to which other router(s).?
A. To the other clients only
B. To the EBGP peers only
C. To the EBGP peers and other clients only
D. To the EBGP peers and other clients and non-clients
Answer: C

Cisco   642-885   642-885 original questions

NO.3 Which two statements correctly describe the BGP ttl-security feature? (Choose two.)
A. This feature protects the BGP processes from CPU utilization-based attacks from EBGP neighbors
which can be multiple hops away
B. This feature prevents IBGP sessions with non-directly connected IBGP neighbors
C. This feature will cause the EBGP updates from the router to be sent using a TTL of 1
D. This feature needs to be configured on each participating BGP router
E. This feature is used together with the ebgp-multihop command
Answer: A,D

Cisco   642-885 dumps   642-885   642-885   642-885 practice test

NO.4 In Cisco IOS-XR, the ttl-security command is configured under which configuration mode?
A. RP/0/RSP0/CPU0:P2(config)#
B. RP/0/RSP0/CPU0:P2(config-bgp)#
C. RP/0/RSP0/CPU0:P2(config-bgp-nbr)#
D. RP/0/RSP0/CPU0:P2(config-bgp-af)#
E. RP/0/RSP0/CPU0:P2(config-bgp-nbr-af)#
Answer: C

Cisco dumps   642-885 test   642-885   642-885

NO.5 Referring to the topology diagram show in the exhibit,
which three statements are correct regarding the BGP routing updates? (Choose three.)
A. The EBGP routing updates received by R1 from R5 will be propagated to the R2, R4, and R7 routers
B. The EBGP routing updates received by R3 from R6 will be propagated to the R2 and R4 routers
C. The EBGP routing updates received by R1 from R5 will be propagated to the R2 and R4 routers
D. The IBGP routing updates received by R3 from R2 will be propagated to the R6 router
E. The IBGP routing updates received by R2 from R1 will be propagated to the R3 router
F. The IBGP routing updates received by R1 from R4 will be propagated to the R5, R7, and R2 routers
Answer: A,B,D

Cisco   642-885   642-885 answers real questions

NO.6 When implementing source-based remote-triggered black hole filtering, which two configurations are
required on the edge routers that are not the signaling router? (Choose two.)
A. A static route to a prefix that is not used in the network with a next hop set to the Null0 interface
B. A static route pointing to the IP address of the attacker
C. uRPF on all external facing interfaces at the edge routers
D. Redistribution into BGP of the static route that points to the IP address of the attacker
E. A route policy to set the redistributed static routes with the no-export BGP community
Answer: A,C

Cisco exam   642-885   642-885 dumps

NO.7 Refer to the exhibit.
Given the partial BGP configuration, which configuration correctly completes the Cisco IOS-XR route
reflector configuration where both the 1.1.1.1 and 2.2.2.2 routers are the clients and the
3.3.3.3 router is a non-client IBGP peer?
A. neighbor 1.1.1.1 remote-as 65123 route-reflector-client neighbor 2.2.2.2 remote-as 65123
route-reflector-client neighbor 3.3.3.3 remote-as 65123
B. neighbor 1.1.1.1 address-family ipv4 unicast remote-as 65123 route-reflector-client neighbor 2.2.2.2
address-family ipv4 unicast remote-as 65123 route-reflector-client neighbor 3.3.3.3 address-family ipv4
unicast remote-as 65123
C. neighbor 1.1.1.1 remote-as 65123 address-family ipv4 unicast route-reflector-client neighbor 2.2.2.2
remote-as 65123 address-family ipv4 unicast route-reflector-client neighbor 3.3.3.3 remote-as 65123
D. neighbor 1.1.1.1 remote-as 65123 neighbor 1.1.1.1 route-reflector-client neighbor 2.2.2.2 remote-as
65123 neighbor 2.2.2.2 route-reflector-client neighbor 3.3.3.3 remote-as 65123
Answer: C

Cisco   642-885 braindump   642-885 certification

NO.8 Which three methods can be used to reduce the full-mesh IBGP requirement in a service provider core
network? (Choose three.)
A. implement route reflectors
B. enable multi-protocol BGP sessions between all the PE routers
C. implement confederations
D. implement MPLS (LDP) in the core network on all the PE and P routers
E. enable BGP synchronization
F. disable the IBGP split-horizon rule
Answer: A,C,D

Cisco braindump   642-885 braindump   642-885   642-885   642-885

NO.9 Which two BGP mechanisms are used to prevent routing loops when using a design with redundant
route reflectors? (Choose two.)
A. Cluster-list
B. AS-Path
C. Originator ID
D. Community
E. Origin
Answer: A,C

Cisco questions   642-885   642-885 exam dumps   642-885

NO.10 Refer to the topology diagram shown in the exhibit and the partial configurations shown below.
Once the attack from 209.165.201.144/28 to 209.165.202.128/28 has been detected, which additional
configurations are required on the P1 IOS-XR router to implement source-based remote-triggered black
hole filtering?
! router bgp 123 address-family ipv4 unicast redistribute static route-policy test !
A. router static address-family ipv4 unicast 209.165.202.128/28 null0 tag 666 192.0.2.1/32 null0 tag 667 !
route-policy test if tag is 666 then set next-hop 192.0.2.1 endif if tag is 667 then set community (no-export)
endif end-policy !
B. router static address-family ipv4 unicast 209.165.201.144/28 null0 tag 666 192.0.2.1/32 null0 tag 667 !
route-policy test if tag is 666 then set next-hop 192.0.2.1 endif if tag is 667 then set community (no-export)
endif end-policy !
C. router static address-family ipv4 unicast 209.165.201.144/28 null0 tag 666 192.0.2.1/32 null0 !
route-policy test if tag is 666 then set next-hop 192.0.2.1 set community (no-export) endif end-policy
D. router static address-family ipv4 unicast 209.165.202.128/28 null0 tag 666 192.0.2.1/32 null0 !
route-policy test if tag is 666 then set next-hop 192.0.2.1 set community (no-export) endif end-policy !
Answer: C

Cisco questions   642-885   642-885 test questions

IT-Tests's product is prepared for people who participate in the Cisco certification 642-885 exam. IT-Tests's training materials include not only Cisco certification 642-885 exam training materials which can consolidate your expertise, but also high degree of accuracy of practice questions and answers about Cisco certification 642-885 exam. IT-Tests.com can guarantee you passe the Cisco certification 642-885 exam with high score the even if you are the first time to participate in this exam.