Add IT-Tests's products to cart now! You will have 100% confidence to participate in the exam and disposably pass HP certification HP0-Y33 exam. At last, you will not regret your choice.
If you still desperately cram knowledge and spend a lot of precious time and energy to prepare for passing HP certification HP0-Y33 exam, and at the same time do not know how to choose a more effective shortcut to pass HP certification HP0-Y33 exam. Now IT-Tests.com provide you a effective method to pass HP certification HP0-Y33 exam. It will play a multiplier effect to help you pass the exam.
Exam Code: HP0-Y33
Exam Name: HP Implementing HP Wireless Networks HP0-Y33
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Updated: 2013-08-31
If you buy IT-Tests's HP certification HP0-Y33 exam practice questions and answers, you can not only pass HP certification HP0-Y33 exam, but also enjoy a year of free update service. If you fail your exam, IT-Tests.com will full refund to you. You can free download part of practice questions and answers about HP certification HP0-Y33 exam as a try to test the reliability of IT-Tests's products.
Selecting the products of IT-Tests.com which provide the latest and the most accurate information about HP HP0-Y33, your success is not far away.
HP0-Y33 (Implementing HP Wireless Networks) Free Demo Download: http://www.it-tests.com/HP0-Y33.html
NO.1 which feature should you enable to enhance Layer 2 (L2) roaming?
A. seamless roaming
B. rapid authentication
C. WPA2 Opportunistic Key Caching
D. single network AP hopping
Answer: C
HP original questions HP0-Y33 study guide HP0-Y33
NO.2 In the configuration of an E-MSM760 controller, you find that the default VSC is access controlled.
Which statements are true about an inbound packet on the LAN port which does not have a VLAN tag?
(Select two.)
A. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
B. The packet is associated with that VSC if the packet has a known SSID tag.
C. The packet is dropped as the LAN port will only accept VLAN tagged packets.
D. The packet is associated with the default VSC if it has no matching SSID tag.
E. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
Answer: B,D
HP study guide HP0-Y33 test answers HP0-Y33 certification HP0-Y33 original questions
NO.3 .What are the major benefits of creating a team of controllers? (Select two.)
A. controller redundancy
B. Flow support
C. local DHCP support
D. PPTP client and server support
E. single IP management of all team controllers
Answer: A,E
HP answers real questions HP0-Y33 practice test HP0-Y33 answers real questions HP0-Y33
NO.4 In your existing wireless network you have a variety of E-MSM controllers. Which products are capable
of supporting teaming? (Select two.)
A. E-MSM710
B. E-MSM730
C. E-MSM750
D. E-MSM760
E. E-MSM765zl
Answer: D,E
HP HP0-Y33 HP0-Y33 answers real questions HP0-Y33
NO.5 When configuring the MSM controller for a controlled mode network, at which point is the AP's VSC
egress VLAN configured?
A. when the Group is created
B. when the AP is synchronized with its Group
C. when the specified VLAN is created
D. when the VSC is bound to the Group
Answer: D
HP HP0-Y33 certification training HP0-Y33 HP0-Y33 certification
NO.6 After completing the configuration and synchronization of all team members, you discover through your
initial testing that your APs cannot associate with your team controllers. To solve this problem what should
you check?
A. that your VSC DHCP parameters are set correctly
B. that you have enabled your local DHCP server on your Team Manager (controller)
C. that an external DHCP server exists and is operational on your network
D. that DHCP Relay has been configured on all your team members (controllers)
Answer: C
HP HP0-Y33 exam prep HP0-Y33 HP0-Y33 test questions HP0-Y33
NO.7 When Centralized Access Control is configured as Automatic, when is a user data tunnel created?
A. when more than one controller is on the network that has the same access control configuration
B. when tunnels are manually configured and available
C. when IPSec is set up between two controllers
D. when a synchronized AP and its controller are on different subnets
Answer: D
HP braindump HP0-Y33 demo HP0-Y33 practice test HP0-Y33
NO.8 On a VSC, which Traffic Type options can be specified for egress VLANs? (Select three.)
A. default gateway traffic
B. IP filtered traffic
C. authenticated traffic
D. untagged traffic
E. intercepted traffic
F. unauthenticated traffic
Answer: C,E,F
HP HP0-Y33 answers real questions HP0-Y33 HP0-Y33
NO.9 An HP E-MSM760 Controller receives untagged traffic on its LAN port from a wireless client associated
with an access point from another manufacturer. In a WLAN configured with VSCs 1-4, which VSC will be
selected to pass this traffic?
A. VSC 2
B. VSC 3
C. VSC 4
D. default VSC
Answer: D
HP certification HP0-Y33 HP0-Y33
NO.10 When would the IP address of the Internet port on an MSM controller be set to "No Address"?
A. when NAT is enabled
B. when only authenticated traffic is passing through the Internet port
C. when NAT is disabled
D. when only VLAN traffic is passing through the Internet port
Answer: D
HP original questions HP0-Y33 braindump HP0-Y33 test
NO.11 A financial institution needs to deploy 80 access points in their new building. Since the institution is not
interested in purchasing additional wired switches for their LAN infrastructure, which solution should be
recommended to manage the access points?
A. HP A3000-24G-PoE+ Wireless Switch
B. HP A-WX5002 Access Controller
C. HP A-WX5004 Access Controller
D. HP A7500/E7900 Access Controller Module
Answer: C
HP exam simulations HP0-Y33 HP0-Y33 questions
NO.12 In order to create a new VLAN in an MSM controller configuration, which path should you take to
access the correct screen?
A. VSCs>[select a VSC]>VSC Profile
B. VSCs>VSC bindings>VLANs
C. Controller>Management>VLANs
D. Controller>Network>Ports
Answer: D
HP HP0-Y33 test answers HP0-Y33 HP0-Y33
NO.13 Your controller's Team Manager has suffered a catastrophic failure and an Interim Manager has been
selected. Which action is required to allow the Interim Manager to distribute a new software release to its
team members?
A. The Interim Manager is promoted to Team Manager status.
B. The Interim Manager is rebooted and reconfigured as the new Team Manager.
C. The Interim Manager promotes another team member to Team Manager and the new TeamManager
uploads the new software to the team members.
D. Each Team Member is manually upgraded from the Interim Manager.
Answer: A
HP exam dumps HP0-Y33 HP0-Y33 HP0-Y33 practice test
NO.14 What is the maximum number of E-MSM controllers that can be configured into a single team?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: E
HP demo HP0-Y33 pdf HP0-Y33 test questions HP0-Y33
NO.15 Click the Exhibit button.
You have deployed a guest wireless service in the reception area of a marketing firm. The clients
associated with the guest service should be assigned to VLAN 10. When you test the configuration,
clients are being assigned IP addresses in the 192.168.0.0 subnet. You view the access controller
configuration shown in the exhibit.
Which command resolves the issue by correctly associating VLAN 10 with the appropriate interface.?
A. [sysname-wlan-st-1] port access vlan 10
B. [sysname-WLAN-ESS1] port access vlan 10
C. [sysname-GigabitEthernet1/0/1] port access vlan 10
D. [sysname-Vlan-interface10] port access vlan 10
Answer: B
HP HP0-Y33 original questions HP0-Y33 original questions
IT-Tests.com is a professional website. It focuses on the most advanced HP HP0-Y33 for the majority of candidates. With IT-Tests.com, you no longer need to worry about the HP HP0-Y33 exam. IT-Tests.com exam questions have good quality and good service. As long as you choose IT-Tests.com, IT-Tests.com will be able to help you pass the exam, and allow you to achieve a high level of efficiency in a short time.
没有评论:
发表评论