2014年1月29日星期三

Symantec certification ST0-237 the latest examination questions and answers come out

With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, Symantec's ST0-237 exam certification is the essential certification of the IT industry. Because this exam is difficult, through it, you may be subject to international recognition and acceptance, and you will have a bright future and holding high pay attention. IT-Tests.com has the world's most reliable IT certification training materials, and with it you can achieve your wonderful plans. We guarantee you 100% certified. Candidates who participate in the Symantec ST0-237 certification exam, what are you still hesitant?Just do it quickly!

If your budget is limited, but you need complete exam material. Then you can try the IT-Tests.com's Symantec ST0-237 exam training materials. IT-Tests.com can escort you to pass the IT exam. Training materials of IT-Tests.com are currently the most popular materials on the internet. ST0-237 Exam is a milestone in your career. In this competitive world, it is more important than ever. We guarantee that you can pass the exam easily. This certification exam can also help you tap into many new avenues and opportunities. This is really worth the price, the value it creates is far greater than the price.

Compared with other training materials, why IT-Tests.com's Symantec ST0-237 exam training materials is more welcomed by the majority of candidates? First, this is the problem of resonance. We truly understand the needs of the candidates, and comprehensively than any other site. Second, focus. In order to do the things we decided to complete, we have to give up all the unimportant opportunities. Third, the quality of the product. People always determine a good or bad thing based on the surface. We may have the best products of the highest quality, but if we shows it with a shoddy manner, it naturally will be as shoddy product. However, if we show it with both creative and professional manner, then we will get the best result. The IT-Tests.com's Symantec ST0-237 exam training materials is so successful training materials. It is most suitable for you, quickly select it please.

IT-Tests.com Symantec ST0-237 exam information are cheap and fine. We use simulation questions and answers dedication to our candidates with ultra-low price and high quality . We sincerely hope that you can pass the exam. We provide you with a convenient online service to resolve any questions about Symantec ST0-237 exam questions for you.

If you buy IT-Tests.com Symantec ST0-237 exam training materials, you will solve the problem of your test preparation. You will get the training materials which have the highest quality. Buy our products today, and you will open a new door, and you will get a better future. We can make you pay a minimum of effort to get the greatest success.

Exam Code: ST0-237
Exam Name: Symantec (Symantec Data Loss Prevention 12 Technical Assessment)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 300 Questions and Answers
Last Update: 2014-01-29

IT-Tests.com Symantec ST0-237 exam questions are made ​​in accordance with the latest syllabus and the actual Symantec ST0-237 certification exam. We constantly upgrade our training materials, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam. If you still confused to use the training materials of IT-Tests.com, then you can download part of the examination questions and answers in IT-Tests.com website. It is free to try, and if it is suitable for you, then go to buy it, to ensure that you will never regret.

ST0-237 (Symantec Data Loss Prevention 12 Technical Assessment) Free Demo Download: http://www.it-tests.com/ST0-237.html

NO.1 Which two locations can the administrator verify a newly created policy was loaded on a
detection server? (Select two.)
A. System > Servers > Overview
B. System > Servers > Server Detail
C. Manage > Policies > Policy List
D. System > Servers > Overview > Configure Server
E. System > Servers > Events
Answer: B,E

Symantec demo   ST0-237   ST0-237   ST0-237   ST0-237

NO.2 Which rule will you use to discover disabled controllers failures in the Storage Foundation
5.0 environment?
A. vxse_host
B. vxse_disk
C. vxse_disklog
D. vxse_dc_failures
Answer: D

Symantec   ST0-237   ST0-237 exam prep

NO.3 You have a system that has two disks-disk01 and disk02, which are mapped into the system
configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01
to become detached.What would you do to view the status of the failed disk01?
A. Use the vxdg list command
B. Use the vxdg -s list command
C. Use the vxprint command
D. Use the vxdisk list command
Answer: D

Symantec demo   ST0-237   ST0-237 pdf

NO.4 When you attempt to start the RAID-5 volume, you are prompted with an error message
"VxVM ERROR V-5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity
is stale." You want to remove this error and start the RAID-5 volume.
How will you ensure that you do not encounter this error again?
A. Use a single RAID-5 log plex in RAID-5 volumes.
B. Change the subdisks.
C. Use two or more RAID-5 log plexes in RAID-5 volumes.
D. Reattach the subdisks.
Answer: C

Symantec   ST0-237   ST0-237 test answers   ST0-237 certification training

NO.5 In System Overview, the status of a detection server is shown as 'unknown'. Examination of
the detection server reveals all Vontu services are running.
Which port is blocked and causing the server to be in the 'unknown' state?
A. 443
B. 8000
C. 8100
D. 8300
Answer: C

Symantec questions   ST0-237   ST0-237   ST0-237 practice test

NO.6 A system administrator has a large amount of data that is not being accessed on the
company's storage devices. This excess amount of data is causing slow access to the active data. You
want to set up automatic relocation of data so that data expires as per its defined age.
What should you do?
A. Use the Data Movement Service (DMS) to set the threshold for automatic relocation of data.
B. Use the Quality of Storage Service (QoSS) to set the threshold for automatic relocation of data.
C. Use the Virtual Data Aging Service (VDAS) to set the threshold automatic relocation of data.
D. Use the Intelligent Volume Service (IVS) to set the threshold for automatic relocation of data.
Answer: B

Symantec exam   ST0-237 exam simulations   ST0-237 demo   ST0-237

NO.7 You need to create a new volume. The new volume will only use disks on controller 1. You
want to execute the vxassist command with the ctlr:c1 storage attribute. You want to ensure that
the command provides desired output.
What should you ensure to meet the required goal?
A. Ensure that storage attribute is a part of the disk group.
B. Ensure that storage attribute is a part of the plex.
C. Ensure that storage attribute is a part of the disk.
D. Ensure that storage attribute is a part of the volume.
Answer: A

Symantec dumps   ST0-237   ST0-237 certification training   ST0-237

NO.8 You need to create a volume for the HR department. You need to mount a file system with a
high demand for I/O throughput. You are aware that spanning the volume across multiple disks will
increase the I/O performance.Which risk should you be aware of when spanning the volume across
multiple disks?
A. Write throughput degradation
B. Single disk failure causes volume failure
C. Requirement for disk redundancy
D. Poor I/O performance
Answer: B

Symantec demo   ST0-237 test answers   ST0-237

NO.9 You have a nonredundant concatenated volume named datavol in a disk group named datadg.
The volume has a file system on it. One of the underlying disks of the volume called datadg02 fails
temporarily due to a power failure. You fix the problem of the power failure, and ensure that the
disk is powered back again. You ensure that both the system and VxVM can see the disk again. Then,
you reattach the disk back to the disk media record.
Which command will you execute next to be able to run fsck on the file system?
A. vxvol -g datadg start datavol
B. vxrecover -s datavol
C. vxrecover -ns
D. vxvol -g datadg -f start datavol
Answer: D

Symantec test questions   ST0-237   ST0-237 test   ST0-237   ST0-237

NO.10 What is the minimum percentage of spare disks in a disk group?
A. 10%
B. 15%
C. 20%
D. 25%
Answer: A

Symantec questions   ST0-237   ST0-237   ST0-237   ST0-237 demo   ST0-237

NO.11 An incident responder is viewing a discover incident snapshot and needs to determine which
information to provide to the next level responder.Which information would be most useful in
assisting the next level responder with data clean-up?
A. Incident Details: Message Body content
B. Custom Attributes: Most Active User from Data Insight
C. Incident Details: File Owner metadata
D. Access Information: File Permissions
Answer: B

Symantec exam prep   ST0-237 exam   ST0-237   ST0-237 dumps

NO.12 Which valid automated response option should an administrator choose for Email Prevent?
A. modify the message subject or add specific RFC-2822 headers
B. add metadata to email headers of confidential email
C. modify the body of email messages containing confidential data
D. process confidential email re-routed to a specified email list
Answer: A

Symantec exam simulations   ST0-237 questions   ST0-237   ST0-237

NO.13 After installing Veritas Enterprise Administrator, you start the VEA with the profile name that
you have specified.When you click the Console View, what does it display? (Select two.)
A. Active Events
B. Volume Summary
C. Alerts
D. Disk History
Answer: A,C

Symantec original questions   ST0-237   ST0-237 exam prep   ST0-237 exam dumps   ST0-237   ST0-237

NO.14 You are managing a Storage Foundation 5.0 server that has Storage Foundation Management
Server (SFMS) software installed. You force a placement policy to a file system using the Storage
Foundation Management Server (SFMS).
What is the outcome when a policy is forced to a file system?
A. The current policies of the file system are overwritten by the SFMS policies.
B. The file system will retain its policies and discard the SFMS policies.
C. The file system will incorporate the changes of both the policies.
D. The file system will apply the SFMS policies only in the case where its own policies cannot be
assigned.
Answer: A

Symantec   ST0-237   ST0-237   ST0-237   ST0-237 braindump   ST0-237 dumps

NO.15 Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
A. The CDS format cannot contain a private region and a public region on a single partition.
B. The CDS format cannot be used with hardware RAID controllers.
C. The CDS format cannot be used in conjunction with OS-level partitioning.
D. The CDS format cannot be used for boot disks.
Answer: D

Symantec exam dumps   ST0-237   ST0-237 certification training

NO.16 A DLP administrator needs to forward data loss incidents to the company's Security
Information and Event Management (SIEM) system.Which response rule action provides the
administrator with the ability to accomplish this task?
A. All: Send Email Notification
B. All: Log to a Syslog Server
C. All: Add Note
D. All: Set Attribute
Answer: B

Symantec   ST0-237 dumps   ST0-237

NO.17 An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused
the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable
and is considered stale and detached.What is the RAID level in the volume in this situation?
A. 0
B. 2
C. 4
D. 5
Answer: D

Symantec   ST0-237   ST0-237   ST0-237 study guide   ST0-237 original questions

NO.18 An information security officer has detected an unauthorized tool on desktops being used to
transmit data with encrypted communications.
Which Symantec Data Loss Prevention feature should the information security officer use to prevent
this tool from accessing confidential data?
A. removable storage monitoring
B. network protocol monitoring
C. application path filtering
D. application monitoring
Answer: D

Symantec test questions   ST0-237   ST0-237 answers real questions

IT-Tests.com offer the latest 000-585 Questions & Answers and high-quality MB3-701 PDF Practice Test. Our JN0-690 VCE testing engine and 1z0-457 study guide can help you pass the real exam. High-quality 000-N45 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/ST0-237.html

没有评论:

发表评论